Removal of „asbestos-containing“ paint at surfaces with difficult access
We developed for a treatment (grinding) at two parallel surfaces, with only 7cm space between and 25cm height, a grinding tool with overlaying diamond-segments which fit into this area and which was able to treat also the small inside-edges.
The A60-D3 disc has been developed to address the following problem:
To perform a surface removal of an asbestos coating on parallel walls spaced 7 cm apart over a height of 25 cm.
We have made a tool with protruding segments to have access to the bottom of the wall’s corners.
This disc is used with our ALN50 angle-grinder with an offset head and belt drive.